射芯機的操作方法
Operation method of core shooting machine
一、在覆膜砂射芯機運轉之前
1. Before the operation of coated sand core machine.
1、清除妨礙射芯機設備正常運轉的障礙物。
1, remove obstacles that interfere with the normal operation of the core equipment.
2、按潤滑卡規定，對設備進行潤滑。
2. Lubricate the equipment according to the lubrication card.
3、檢查射芯機設備關鍵部位的緊固件是否緊固，如有松動，必須緊固好。
3, check whether the fasteners of the key parts of the core equipment are tight. If there is any loosening, they must be fastened.
4、檢查全部伐門手柄是否都在靜止位置上。
4. Check whether all door handles are at rest.
5、擰開壓縮空氣總伐，對射芯機設備進行空載試車。在這個過程中，要檢查機構的動作是否正常， 檢查各個伐門的管路是否漏氣。
5, unscrew the compressed air total cutting, and carry out the no-load trial run for the core shooting equipment. In this process, check whether the action of the mechanism is normal, check whether the pipeline of each valve is leaking.

二、在操作覆膜砂射芯機的過程中
Two. During the operation of coated sand core machine

1、射芯機開動以后，操作人員不得擅離工作崗位，應集中思想，按工藝程序，認真進行操作，但不許同時操作兩個伐門。
1. After the core-shooting machine starts, the operator must not leave his post without permission. He should concentrate his mind and operate it conscientiously according to the technological procedure, but he must not operate two valves at the same time.