澆注機加氣混凝土澆注機采用螺旋漿式攪拌，在罐內形成很強的渦流，破壞生石灰顆粒的包膜，使之達到充分均勻的混合。同時可升降的澆注臂隨澆注過程調整高度，防止飛濺。本機分固定式和移動式配合漿料，定量澆注在模具上。

The castable aerated concrete casting machine is stirred with spiral slurry, which forms a strong eddy in the tank and destroys the coating of lime particles to make it fully and evenly mixed. At the same time, the lifting arm can adjust the height with the casting process to prevent splash. The machine is divided into fixed and mobile size mixture, and is poured on the mould.

澆注機分固定式和移動式配合漿料，定量澆注在模具上。

The pouring machine is divided into fixed and mobile size mixture, and is poured into the mold quantitatively.

扇形澆注機實際上是一扭王塊模具 高鐵遮板模具  保定室內設計培訓 保定平面設計培訓種茶壺包的變形，是在40－50年前使用的一種設備。它采用從液面進行澆注，這就從原理上決定了，扇形澆包在補充鐵水時不能連續澆注，必須停產。讓我們計算一下這微不足到的損失到底有多少：生產球鐵時由于防止球化衰退，每8分鐘必須補充一次鐵水。生產灰鐵時由于鐵水溫度損失的影響，每13-15分鐘也需要補充一次鐵水。

Fan shaped pouring machine is actually a kind of teapot bag deformation, which was used 40-50 years ago. It is used to pour from the liquid surface, which is decided by principle. Fan casting ladle can not be poured continuously when supplying hot metal, and it must be stopped. Let's calculate how much the loss is: if we want to prevent spheroidization, we must add molten iron every 8 minutes to produce ductile iron. Due to the loss of molten iron temperature, the production of gray iron needs to be supplemented once every 13-15 minutes.