壓力式澆注機工作原理
Working principle of pressure pouring machine
鐵水經擋閘板擋渣后,經U形出水口無壓力流出,在鐵水表面張力作用下呈平穩的圓形流束注入型腔.可編程序控制器和伺服系統控制扇形包的角速度和液面高度來控制鐵水的流速.其特點為:不帶氣、沖刷少、收包斷流快速干凈、飛濺少、鑄件成品率高、所有技術參數都可以通過觸摸屏輸保定古箏 塑料增韌劑 拱形護坡模具 保定空調維修  托輥生產線入和修改.各種工藝參數都可以通過學習(示教)進行設定,并且能把最佳澆注參數存入.再次生產同種產品時只需調出此參數即可.本設備結構簡單、占地面積小、可以為現有造型線加裝,且故障率低,維修、保養方便,是理想的自動澆注設備.
The molten iron flows out without pressure through the U-shaped outlet after being blocked by the ram, Under the action of the surface tension of the molten iron, a stable circular flow beam is injected into the mold cavity. The programmable controller and the servo system control the angular velocity and the liquid level height of the fan-shaped bag to control the flow velocity of the molten iron. Its characteristics are: no gas, less erosion, fast and clean closure and disconnection, less spatter, high casting yield, all technical parameters can be input and modified through the touch screen. Various process parameters can be This equipment has the advantages of simple structure, small floor area, low failure rate, convenient maintenance and repair. It is an ideal automatic pouring equipment