冷芯盒射芯機采用的是氣體硬化法，用樹脂射砂后，通以氣體使砂芯硬化。射芯機上另裝有通氣板，射砂慢盒后，將芯盒工作臺稍稍下降一段距離，在射頭與芯盒之間插入通氣板，再將芯盒與通氣板壓緊，這時由通氣板引入硬化氣體，從芯盒頂上的射孔引入砂芯，并穿過砂芯經下面的排氣孔排出，經過短時間通氣使砂芯硬化，砂芯硬化后，再通過通氣板通入空氣，使空氣穿過已硬化的砂芯，將殘留在砂芯中的有毒的硬化氣體沖洗除去，殘氣通過排氣孔排入專門的凈化裝置。

The cold core box core ejection machine adopts the gas hardening method, and the sand core is hardened with gas after the sand is shot with resin. The core shooting machine are installed on the ventilation board, slow shooting box, box table will decline slightly some distance into the ventilation plate between the emitter and the core box, the core box and the ventilation board. Then, the ventilation plate is introduced into the hardening gas into the sand core from the core box on top of the perforation and, through the sand core is discharged through the exhaust hole below, a short time after the ventilation so that the sand core hardening, hardening sand core, and then through the ventilation board pass into the air, the air passing through the sand core has hardened, the residues of toxic gases in the hardened sand core in washing, residual exhaust gas purification device through hole into the special.